Free worldwide calls !

With tuitalk you can also make free calls out of your iPhone or iPod contact, actually free. And to show it, we by no means ask in your bank card info, as a result of we’re not going to cost you, not at this time and never tomorrow. So, maintain your bank card info protected and save your cash by making.

Benefits to make use of Tuitalk on iphone ?

– Make free telephone calls in your iPhone and iPod contact!

– Flip your iPone3G right into a free telephone.

– Free telephone calls to over 40 nations from anyplace on the planet (with Web entry).

– Free mobile-to-mobile & mobile-to-landline telephone calls, to over 40 Tuitalk Nations.

– Simply watch a brief video advert and make free worldwide & home telephone calls.

– All calls are sponsored by advertisers.

. Dimming the display screen:

the display screen brightens makes use of extra battery energy. Change this below Settings -> Brightness

. Turning off 3G :

In case you are in a location the place 3G doesn’t work, then you’ll not must activate this service in your iphone and you don’t get any profit from the telephone battery-hungry 3G radio. By turning it off, you double the size of your iPhone 3G battery, 5 hours of speak time to 10.

For turning off 3G : In dwelling display screen, faucet Settings / Basic / Community /

Allow 3G Off

. Turning off Wi-Fi :

As with 3G , In case you are in a location the place Wi-Fi doesn’t work, then you’ll not must activate this service in your iphone and you don’t get any profit from the telephone battery.

to do this : In dwelling display screen, faucet Settings/Wi-Fi/On/Off.

. Turning off Bluetooth:

If you happen to’re not utilizing a Bluetooth headset, then for heaven’s sake shut down that Bluetooth radio. In Settings, faucet Basic, and switch off Bluetooth.

. Turning off push e-mail:

In case your electronic mail, calendar, and tackle guide are saved continually synced together with your Macs or PCs, you then’ve in all probability gotten your self concerned with Yahoo Mail, Microsoft Trade , or MobileMe . It’s fairly wonderful to know that your iPhone is consistently saved present with the mothership—however all that continuous sniffing of the airwaves, in search of updates, prices you battery energy. If you are able to do with out the immediacy, go to Settings / Fetch New Knowledge ; take into account turning off Push and letting your iPhone test for brand spanking new info, say, each 15, 30, or 60 minutes.

. Turning off GPS:

In case you are not be needing the iPhone to trace your location, reserve it the facility required to function the GPS chip and the opposite location circuits.

In Settings, faucet Basic, and switch off Location Companies.

All codes Secrets and techniques for Apple iPhone

With these codes you’ll be able to entry to any perform call-status (disabled/enabled), what number of minutes you’ve left in your pre-paid account (in addition to your different quota post-paid minutes)..

*#06# show IMEI quantity.*3001#12345#* and faucet Name. Enter area mode, (iPhone community and mobile info)* 777 # and faucet Name. Present the steadiness quantity if pay as you go .. * 225 # and faucet Name. Submit-paid account steadiness.

* 646 # and faucet Name. Name minute steadiness postpaid telephone.

* # 21 # and faucet Name. Name characteristic setup (enabled / disabled) for voice, knowledge, fax, SMS, sync, async, entry bundle, name forwarding.

* # 30# and contact name. Caller-ID show test (on / off)

* # 76# and contact name. Linked name display screen test (on / off)

* # 43# and contact name. Decide if name ready is activated.

* # 61 # and faucet Name. Name with a variety of companies (no-answer)

See also  35 Terminator Quotes from the Iconic Franchise

* # 62 # and faucet Name. Name Forwarding quantity with out service (non-ring)

* # 67 # and faucet Name. Name when the quantity occupied

* # 33 and # contact name. Verify outgoing name companies for call-barring (enabled / disabed)


How To Enter the Unlock Codes on a BlackBerry Cell Telephone

All fashions of BlackBerry (don’t work with T-Cell)

1 – Go to the menu, then Settings Menu -> Choose Superior choices => after which Sim card.

2 – Whereas holding down the SHIFT key, sort MEPD or (MEPPD combines for Vodafone)

3 – It’s best to now see the 5 classes listed lock.

4 – Whereas holding down the SHIFT key, sort MEP2 or (MEPP2 handsets for Vodafone)

5 – Launch the Shift key.

6 – You at the moment are invited to enter the Community MEP code (it is going to even be the variety of makes an attempt left)

7 – Enter the code

8 – Enter Return / Enter

9 – The machine have to be unlocked

Mannequin : T-mobile BlackBerry Fashions

1 – In House display screen, click on the Instruments icon. The Choices display screen seems.

2 – Choose Settings icon.

3 – Scroll to SIM Card and choose it. It’s best to see the telephone quantity and and identification variety of the SIM card.

4 – Kind ‘mepd’ to show the primary 5 ranges of SIM locking.

T-Cell makes use of the community to lock community ought to show Lively. All different states have to be disabled

notice: For the Blackberry 7100t you press “P” twice when coming into the mepd ‘and’ mep2 “for steps 4 and 5..

5 – Type ‘mep2′ to display the dialog box asking for the unlock code (Press the Alt + 2 key to get the number 2)

6 – Enter the unlock code network

7 – Press ENTER and reboot handheld.

All codes Secrets Information BlackBerry:

Decibel meter.

Displays your signal strength in decibels, instead of bars.

Hold “Alt” and press “N”, “M”, “L”, “L” (repeat to reverse the effect).

Address Book file verification.

Checks the data in your Address Book for inconsistencies.

In the Address Book, hold “Alt” and press “V”, “A”, “L”, “D”.

Address Book data structure rebuild.

Forces a data structure re-build in the Address Book…

In the Address Book, hold “Alt” and press “R”, “B”, “L”, “D”.

View source code.

Displays the source code of a Web page.

In the Browser, hold “Alt” and press “R”, “B”, “V”, “S”.

Help Me! menu.

Provides crucial technical information about your device, for when seeking technical support or help in forums…

Hold “Alt” and (left) “shift”, then press “H”.

IMEI display.

Displays your device’s international mobile equipment identity (IMEI – your serial number) on-screen… Also works from all other GSM handsets.

Type “*”, “#”, “0”, “6”, “#” on the Home screen.

“Comfortable” reset.

Performs a “gentle” reset of your device; the equivalent of doing a “battery pull” (ie. Removing the battery for a few seconds).

Press-and-hold “Alt”, then press-and-hold (left) “shift”, then press-and-hold “Del”.

Event Log.

Displays event logs of all the system-level events that occur on your device…

Hold “Alt” and press “L”, “G”, “L”, “G”.

All of these secrets have been tested on the BlackBerry 8800 and BlackBerry Curve 8300; .

In some cases, you will need to be on the Home screen when you enter these codes…

Key shortcuts:

A or C = phonebook

S = search

F = phone profiles

W or B = browser

H = help

K = locks the keys

L = calendar

V = messages

M = messages folder

R = alarm

T = tasks

U = calculator

I = applications

O = options

P = phone

Some new additions thanks to the contributions in this thread:

T – Top of page (in browser)

B – Bottom of page (in browser)

Space – Page down (in browser)

ALT + Right Shift + Del = hard reset

See also  7. Classful Queuing Disciplines (qdiscs)

D – Memo pad

U – Switch between hide/unhide in title bar (in browser)

ALT + NMLL = numbers instead of bars for signal strength


Sony Ericsson Codes Secrets Tips and Tricks 

Sony Ericsson Secret Codes 2

Reset English Menu: *#0000#

Programming Menu (Short): 987 + >

Programming Menu (Long): 923885 + >

Field Test: 904090 + > (to exit 904090 + >)

Phone Test: 904059 + > (to exit 3 + <)

Analog Mode: 904095 + menu DM mode 904959 + menu

Sony Ericsson secret codes

Secret codes

Secret menu / Software version: >*<<*<*

Reset Theme <0000>

Serial Number / IMEI: *#06#

Network Information <**<

Lock status: <- * * <-

Shortcut to last dialed numbers: 0#

Default Language: < 0 0 0 0 >

Shortcut to sim numbers: On main menu type a number and press #

Programming Checks: >*<<*<*> or >*<<*<*>

Phone Test: 904059 + > (to exit 3 + <)

Opening phone without a SIM card: **04*0000*0000*0000# followed by on ‘Wrong Pin’ number

Here are some of hidden smilies for messages. You wont find them in “Add image”

1. :-]

2. :-[

3. :-*

4. [:]

5. :<^

6. ://

7. :&

8. :'(


All codes Secrets for LG Cell phone

These secret codes will work on most of the LG mobile Phone handsets

LG all models test mode: Type 2945#*# on the main screen.

2945*#01*# Secret menu for LG

IMEI (ALL): *#06#

IMEI and SW (LG 510): *#07#

Software version (LG B1200): *8375#

Recount cheksum (LG B1200): *6861#

Factory test (B1200): #PWR 668

Simlock menu (LG B1200): 1945#*5101#

Simlock menu (LG 510W, 5200): 2945#*5101#

Simlock menu (LG 7020, 7010): 2945#*70001#

Simlock menu (LG 500, 600): 2947#*


Code to read phone version :

– Phone without SIM

– Enter 277634#*# or 47328545454#

– Select ‘SW’

Code to reset phone :

– Phone without SIM

– Enter 277634#*# or 47328545454#

– Select ‘Factory Reset’

Code to enter UNLOCK MENU :

– Phone wit SIM inside

– Enter 2945#*88110#

Test Menu 8330 : 637664#*#

Test Menu 8180 V10a: 49857465454#

Test Menu 8180 V11a: 492662464663#

Test Menu 8130-8138: 47328545454#

Test Menu 8110-8120: 277634#*#


For all:

*#06# Show IMEI

*#9999# Show mobile Software Version

*#0837# Show mobile Software Version (instructions)

*#0001# Show Serial Parameters

*#9125# Activates the smiley when charging

*#0523# LCD Contrast

samsung mobiles

*#9998*228# Battery status (capacity, voltage, temperature)

*#9998*246# Program status

*#9998*289# Change Alarm Buzzer Frequency

*#9998*324# Debug Screens

*#9998*364# Watchdog

*#9998*377# EEPROM Error Stack – Use side keys to select values

*#9998*427# Trace Watchdog

*#9998*523# Change LCD contrast

*#9998*544# Jig detect

*#9998*636# Memory status

*#9998*746# SIM File Size

*#9998*778# SIM Service Table

*#9998*785# RTK (Run Time Kernel) errors – if ok then phn is reset, info is put in memory error

*#9998*786# Run, Last UP, Last DOWN

*#9998*837# Mobile Software Version

*#9998*842# Test Vibrator – Flash the screenlight during 10 sec and vibration activated

*#9998*862# Vocoder Reg – Normal, Earphone or Carkit

*#9998*872# Diag

*#9998*947# Reset On Fatal Error

*#9998*999# Last/Chk

*#9998*9266# Yann debug screen (Debug Screens?)

*#9998*9999# Software version

*0001*s*f*t# Changes serial parameters (s=?, f=0.1, t=0.1)

*0002*?# unknown Samsung’s comand

*0003*?# unknown Samsung’s comand

For Mobile phones SGH (R210, T100, A300…)

if Samsung code is in format *#9998*xxx#

try write in this *#0xxx#



*2767*3855# Full EEPROM Reset (THIS CODE REMMOVES SP-LOCK! but also changes IMEI to 447967-89-400044-0

*2767*2878# Custom EEPROM Reset

Samsung mobile phone codes: Samsung E700

*2767*688# remove USER CODE and SIMLOCK

Samsung mobile phone codes: Samsung V200


Power on the mobile phone without SIM card and type these codes:

*2767*63342# and press green button

*2767*3855# and press green button

*2767*2878# and press green button

*2767*927# and press green button

*2767*7822573738# press button

See also  Download Beholder Free for PC

Phone will be unlocked, but all trims are reseted !!!

Mobile phone must be fully charged

Samsung mobile phone codes: Samsung S500


*2767*MVT# (*2767*688#) E2P MVT Reset

*#SIMLOCK# (*#7465625#)

On the main screen type *#06#

Information you get from the IMEI (International Mobile Equipment Identity)



TAC = Type approval code of your samsung Mobile

FAC = Final assembly code of your cellphone

SNR = Serial number of your samsung Phone

SP = Spare

If you have downloaded corrupted or incompatible Java midlets or other media,

which are causing problems with the phone, try this

*2767*JAVA# Java Reset and (Deletes all Java Midlets)

*2767*MEDIA# Reset Media (Deletes All Sounds and Pics)

*2767*WAP# Wap Reset

*2767*CUST# Reset Custom EEPR0M

*2767*FULL# Reset Full EEPR0M (Caution)

For example : *2767*JAVA# would be keyed in as *2767*5282#

Note : Not all codes will work with SGH-C100.

The master reset code is:


This will not delete anything from your

mobile phone, but set each and eveything to its

default/standard setting as it was on the time of purchase.

To unlock your phone put a sim from another company,

now type *#9998*3323# it will reset your phone. Push exit and then push 7,

it will reset again. Put your other sim in and it will say sim lock,

type in 00 then it should be unlocked. Type in *0141# then

the green call batton and it’s unlocked to all networks.

This code may not work on the older phones and some of the newer phones.

If it doesn’t work you will have to reset your phone without a sim in it

by typing *#2767*2878# or *#9998*3855# (not tested)

Other Samsung Codes

*#9998*4357# Help Menu

*#9998*5282# Java menu (GRPS/CSD settings for JAVA server)

*#9999#0# Monitor Mode

*#9999# or *#9998*9999# Software Version

*#8888# or *#9998*8888# Hardware Version

*#9998*746# or *#9998*0746# or *#0746# Sim Infos

*#9998*523# or *#9998*0523# or *#0523# Display Contrast

*#9998*842# or *#9998*0842# or *#0842# Vibration On (until you push OK)

*#9998*289# or *#9998*0289# or *#0289# Buzzer On (until you push OK)

*#9998*288# or *#9998*0288# or *#0288# Battery & Field Infos

*#9998*377# or *#9998*0377# Error log

*#9998*778# or *#9998*0778# or *#0778# Sim Service table

*#9998*782# show date and alarm clock

*#8999*638# show network information

*#9998*5646# change operator logo at startup

*#9998*76# production number

*#9998*968# view melody for alarm

*#9998*585# Non-Volatile Memory (NVM)

*#3243948# Digital Audio Interference Off

*#32436837# Digital Audio Interference On


Change closed caller group (settings >security settings>user groups) to 00 and your phone will sound the message tone when you are near a radar speed trap.

Setting it to 500 will cause your phone 2 set off security alarms at shop exits.

Try this secret trick if you can handle the unexpected.

Note: This secret trick wont work with all phones Models.


Now you can spy on anyone using your cellphone. Just do the following.

1. Activate the “Computerized Reply” in the headset profile of your cellphone and set the ringing volume to “Mute”

2. Short-circuit the left middle and right pins on the bottom of the mobile phone with all connections touching each other this will activate profile “Headset”.

If you cant do this just keep your earphone connected to mobile.

3. Now place it under a table in a room and call it. Now you can use your phone for checking out what people are talking about in a room. Just call on your phone.

4. The phone receives the call without ringing and you can listen to what people are saying.

Special thanks to:

Leave a Reply

Your email address will not be published.