Guide set up customers, please run pip set up --upgrade uiautomator2 to replace uiautomator2.

RAB 1.3.1

  • Repair: Connecting or disconnecting Go Plus loop
  • Repair: Polygon Paid: If Pokemon Stock is full, RAB will get caught at Pokemon Encounter
  • Repair: Deleting of things by quantity not engaged on some units
  • Doable repair for some units that perviously work on 1.2.3 however not engaged on 1.3.0

Identified Situation

  • The next options may not work wih all telephones
  1. Enchanced PGSharp Mode
  2. PGSharp 100IV Shiny Looking Mode
  3. Quick identification of Pokemon caught standing throughout encounter (Caught, Missed, Escaped, and so on)

Changelog Historical past


Be a part of our Discord Channel


When you merely need to bless the staff, be happy to donate by way of

  • BTC: 1Bs6sueNBYBusYYA3FKuxmyoQTV15QEM3G
  • ETH: 0x3ef0faf691a78ff09622e8f06f9f88acf85a80a3

Word: The above donation is solely to bless us in our work. There shall be no additional advantage by donating by way of the above methodology


  • Auto Catch
  • Auto Preserve or Switch base on IV (100 or PvP)
  • Auto Choose Berries
  • Auto Choose Balls
  • Auto Clear Quests
  • Auto Hatch
  • Auto Merchandise administration
  • Auto Pokemon Bag administration
  • Auto Group Rocket Battle (PGSharp Paid, HAL & Polygon# Solely)
  • Catch Shiny that third Get together App Discovered (Polygon# Paid Solely)
  • 100IV Shiny Hunt utilizing PGSharp sniper feed. (PGSharp solely)
  • (PGSharp Free/Paid) Hunt pokemon with Close by feed (RAB PGSharp Improve Mode)
  • Non rooted help with PGSharp Free or Paid model (NO NOT USE IT ON MAIN ACCOUNT)
  • Wifi Mode

Enhanced Options (Donors Options)

Requires telegram account and donor standing

  • (Rooted Solely) Integration with Telegram feed to permit 100IV Snipe
  • (Rooted Solely) Integration with Telegram feed to permit Shiny Checking
  • (PGSharp Free/Paid) 100IV Shiny Pokemon tapping with Sniper feed

Telephone Necessities

  1. Rooted or PGSharp (non-rooted answer)
  2. Your telephone should have the ability to run Pokemon Go if it is rooted
  3. USB Debugging Enabled (Below Developer Choices)
  4. Telephone with Display screen Decision 720 x 1280 and above
  5. Beneficial 2GB RAM and above
  6. Beneficial Snapdragon 625 and above
  7. Extra settings wanted for Samsung and Xiaomi telephones (Defined in app)

System Necessities

64 bit system is required to run RAB (Home windows 10 – 64bit)

Launch Obtain

  • Window customers can obtain RAB from right here
  • Please learn the sections under on easy methods to setup your telephone to run RAB
  • There aren’t any launch model for Mac and Linux model but. Please learn on for the directions on easy methods to setup RAB in your system.

Organising USB Debugging mode choice

  1. Launch the Settings software in your telephone.
  2. Faucet the About Telephone choice usually close to the underside of the listing.
  3. Then faucet the Construct Quantity choice 7 occasions to allow Developer Mode. You will notice a toast message when it’s carried out.
  4. Now return to the principle Settings display and it is best to see a brand new Developer Choices menu you possibly can entry.
  5. Go in there and allow the USB Debugging mode choice.

Extra Setup required by telephone model

  1. Xiaomi/Poco telephone: Additionally Allow USB Debugging (Safety settings).
  2. Realme/Oppo: Allow “Disable permission monitoring”.
  3. Samsung: Settings -> Show -> Navigation bar -> choose ‘Full display gesture’ and turn-off ‘gesture hints’
  4. Verify your telephone’s colour show. Ensure it is Pure as a substitute of Vivid. For Samsung customers, this setting could be discovered at Settings > Show > Display screen Mode. Different model and fashions it’s important to discover this selection your self.

Extra Apps wanted and their settings

  1. (Optionally available) Set up Pokemod or HAL or Polygon# or PGSharp Please guarantee their enabled/disabled Modules matches with the shopper settings of RAB
  2. (Pokemod, HAL and Polygon# Solely) GPS Joystick, unlock model. Obtain from their official web site You too can use GPS Joystick with none of these third social gathering apps.
  • (Pokemod, HAL, Polygon# Solely) Create/obtain a GPX Route and run it in background. Ensure joystick are hidden from view. GPX Routes in public area
  • (PGSharp Paid Solely) Create/obtain a GPX Route and run it. Don’t disguise PGSharp. Transfer joystick away from location that can block textual content.
  • (Pokemod, HAL, Polygon# Solely) Beneficial Velocity 7km per hour or much less
  1. (Optionally available, if telephone is rooted) Go to playstore and obtain Straightforward DPI Changer (or You need to use this in case your telephone resized and it is advisable reset it instantly. Non-rooted customers, you should utilize the instruments tab in RAB that will help you reset your telephone decision.
  2. Your Pokemon Go Recreation MUST BE in English.
  3. When operating the scripts at your pc, the next app/providers have to be operating in your telephone
  • GPS Joystick (Not wanted for PGSharp)
  • (non-compulsory) MAD Enhancer, Pokemod Espresso, Pokemod HAL, Polygon# or PGSharp
  • Pokemon Go
See also  Acts of Captain Moroni: Rise of Liberty

Pokemod/HAL Assist


  • (Pokemod) IV Show format –> Toast | (HAL) Allow Toasts
  • (Pokemod) IV Show Data –> verbose | (HAL) Toast verbosity –> Informative
  • Toast Location/Place –> High

Allow Modules

  • Allow Prefect Throw
  • Allow Skip Encounter Intro
  • Allow Present Encounter IV (Allow Toasts in Settings)
  • Substitute Names with IVs in Encounters

Disable Modules

  • Disable Block Non-Shiny Encounters
  • Disable Mass Switch any Pokémon (To stop accident switch of your fav lengenary Pokemon)

Optionally available Modules

  • Group Rocket Blastoff (HAL Solely)
  • Prompt Spin
  • Prompt Catch and Switch on Catch (HAL Solely) (When Switch on Catch is enabled, the bot will be unable to stop PvP eligible Pokemon from being transfered)

Allow or disable the settings in RAB’s GUI accordingly

Polygon# Enhancer Assist

Settings for Free model

  • Set a route in GPS Joystick and loop it


  • Encounter nameplates format {default} LVL{lvl}nIV{prc0}% {ivs}
  • Pokemon panel nameplate format {default} LVL{lvl} {ivs}

Settings for Paid model

  • Word that RAB will try to assemble just a few info from Polygon# Paid model first earlier than beginning to catch Pokemon. As such you may see RAB try and spin pokestops continously for just a few mintues earlier than catching. It’s regular.


  • Allow Ship knowledge to customized backend
  • Set backend IP Tackle to the IP of the machine that you’re operating RAB
  • How one can discover your machine’s IP Information Home windows | Mac
  • Enter a port quantity that you simply set in config. Default 5120. In case you are utilizing multiple system, every system will need to have their very own config and with their very own port quantity set.
  • Encounter nameplates format {default} LVL{lvl}nIV{prc0}% {ivs}
  • Pokemon panel nameplate format {default}

Allow or disable the settings in RAB’s GUI accordingly

MAD Enhancer Assist

Overlay Settings

  • Overlay Enabled
  • Present IV Overlay Enabled

App Settings

  • Disable notifications Enabled (Notification will interrupt RAB detection)

Location Settings

  • Disable MAD Enchancer Spoof Location. Please Use GPS Joystick as a substitute

Extra Settings

  • Improve Throws, set to your most well-liked
  • Speedup animations having hit a mon, set to both Speedup or Fast. If utilizing Speedup, Disable RAB’s Fast Catch. If utilizing Fast, Allow RAB’s Fast Catch
  • Stun Mon, you’re inspired to make use of Immobilized

Stock Administration Settings

  • Set your individual Stock administration right here. Disable RAB’s Stock administration

Encounter Identify Settings

  • Don’t allow something right here

Allow or disable the settings in RAB’s GUI accordingly

PGSharp Assist

Settings for Free Model

  • Spoofing Enabled
  • Disguise PGSharp Disabled, transfer joystick to someplace that wont block the display
  • Enhanced Throw on Wonderful and Curved
  • Faucet to Stroll Enabled
  • Stock IV Enabled
  • Encounter IV Enabled
  • Caught Preview Enabled
  • Set your strolling pace to lower than 7km/hr
  • Set a location with the Map or enter coordinates

Settings for Paid Model

  • Spoofing Enabled
  • Disguise PGSharp Disabled, transfer joystick to someplace that wont block the display
  • Enhanced Throw on Wonderful and Curved throw is most well-liked for sooner catching
  • Faucet to Stroll or Teleport Disabled.
  • Stock IV Enabled
  • Encounter IV Enabled
  • Fast Catch Optionally available. Allow Fast Catch in RAB should you set this selection to true.
  • Prompt Beat Group Rocket Optionally available. Set Teamrocket Blast Off to true in RAB should you set this selection to true.
  • Caught Preview Enabled
  • The remainder of choices are non-compulsory
  • Then click on on PGSharp’s icon and select both auto stroll or GPX route (this selection is in map)
See also  VidMix for PC: Download and Install (Windows & Mac)

RAB PGSharp Improve Mode

  • Allow close by feed will set off RAB PHSharp improve mode. (Don’t allow cooldown timer). RAB will computerized place Close by feed, Joystick and Menu Icon to its prefered location. And can attempt to retrieve it is beginning location. If RAB is unable to attain these, you’re suggested to make use of regular mode as a substitute of Improve mode (It imply that improve mode will not be suitable together with your system)
  • Ensure faucet to Stroll is Enabled.
  • Don’t use route (gpx) for this mode.
  • Set your beginning location to a spot with a lot of Pokestop. RAB will teleport again to this location if it runs out of ball (which can doubtlessly make it easier to get out from a spot with none pokestop).

RAB PGSharp 100IV Shiny Faucet (Donor Function)

  • If RAB is unable to get your beginning location, it additionally imply that 100IV Shiny faucet function is not going to be just right for you. (Don’t donate for this function, except you simply need to bless the staff)
  • If utilizing 100IV Shiny faucet function (Donor Function), allow Sniper feed solely, allow 100IV Shiny Hunt in RAB Configuration tab.
  • Allow

Allow or disable the settings in RAB’s GUI accordingly

PC/MAC/LINUX Necessities

Home windows customers who downloaded the discharge model, you simply must configure RAB, configure your telephone and plug in to your PC and run RAB.exe will do. You do not want to observe the steps under. Keep in mind to ctrl+c while you need to exit from RAB.

Home windows customers who downloaded the discharge model, you do not want to learn any additional!

Set up Tesseract

Mac Consumer

  1. Set up by way of Homebrew (
/bin/bash -c "$(curl -fsSL"
  1. Set up Tesseract
brew set up tesseract (set up homebrew when you have not)
  1. Set up ADB
brew cask set up android-platform-tools
  1. Join your system to your mac and run the next to see if it may possibly detect your system
adb units


  1. Set up tesseract by way of apt through the use of the command
sudo apt-get set up tesseract-ocr
  1. Set up adb by way of apt through the use of the command
sudo apt-get set up adb

Putting in all dependencies by way of choclatey (Home windows Consumer Solely)

  • Home windows consumer are inspired to make use of the launch model. In case you are utilizing the discharge model, you do not want to observe the steps under anymore.
  • For many who do not know what choclatey is, it is similar to apt-get in ubuntu/Debian if u know what it’s. If u need to know extra about it earlier than you employ it please go to this hyperlink

Putting in Choclatey

  1. Open the PowerShell as administrator
  2. You should guarantee Get-ExecutionPolicy will not be Restricted, for that you should utilize the next command within the powershell
    Set-ExecutionPolicy Unrestricted
  3. Now run the command
Set-ExecutionPolicy Bypass -Scope Course of -Power; iex ((New-Object System.Internet.WebClient).DownloadString('')) 

Putting in Git with choclatey and downloading RAB

  1. Open PowerShell as administrator
  2. Use the command choco set up git -y to put in git. (Sort “y” and enter if it prompts to).
  3. Restart your PowerShell or use the command refreshenv(Restarting is really useful).
  4. Enter the C drive listing through the use of cd C:
  5. Clone this repo through the use of the command git clone --recursive
    You will discover the RealAndroidBot folder current within the C drive listing after executing this command

Organising the undertaking

  1. (Home windows Solely) ==> Open the RealAndroidBot folder (Which is current within the C drive) in FileExplorer.
    • 1.1 (Ubuntu/Linux) Open terminal and sort: cd ~/
  2. (Home windows Solely) ==> Proper click on on the Set up.ps1 and choose ‘Run with PowerShell’
  3. (Home windows Solely) ==> The set up will take a while and it’ll immediate press any key to proceed (press any key) after which u shall be directed to the PS C:Windowssystem32> listing.
  4. (Mac and Linux) Set up Python 3.7 or later (
  5. (Home windows Solely) ==> Now use cd C: and Comply with through the use of python3 -m venv RealAndroidBot
    Word: In case your display return python after this command, please kind on this as a substitute python -m venv RealAndroidBot
    (Mac and Linux) Comply with the identical step however skip the cd .. half
  6. Comply with by (Mac and Linux) supply RealAndroidBot/bin/activate (Home windows) RealAndroidBotScriptsactivate
  7. Comply with by cd RealAndroidBot
  8. Copy config.instance.yaml to rab/config.yaml and configure it through the use of notepad++. Don’t use notepad to edit.!
  9. Again to Terminal or PowerShell, kind pip set up -r necessities.txt
  10. Comply with by cd rab
  11. Setup your telephone in accordance with app necessities as instructed above and run all required apps on telephone
  12. Ensure your Pokemon Go is at map web page and zoomed out to the max.
  13. Ensure your system are related to your machine, run this command in Terminal or PowerShell python -m uiautomator2 init. Verify your telephone and permit set up of automator in your Telephone
  14. Please guarantee you will have copied config.instance.yaml to rab/config.yaml and configure it, then run
    python in your terminal or powershell
  15. To run a number of units, first run adb units to get all of your system ID related to your pc
  16. Then run every command on their very own terminal/shell console
    python --device-id YOUR_DEVICE_ID
  17. To make use of a unique config file (good for a number of units setup) run
    python --device-id YOUR_DEVICE_ID --config-filename YOUR_CONFIG_FILE_NAME
  18. Ctrl + C to terminate this system (you may need to do it greater than as soon as)
  19. Everytime you need to run the scripts once more, keep in mind to run Step 7 first observe by (mac/linux) cd RealAndroidBot/rab or (Home windows) cd RealAndroidBotrab
  20. To replace your information from github repo, kind git pull


RAB Mess up my display decision and my navigation bar went lacking!!

See also  Siemens FiberSIM 16.0.1 Free Download

(Linux & Mac Customers) Open your terminal, kind within the following command. (press enter earlier than coming into the opposite)
adb shell wm measurement reset
adb shell wm density reset
adb shell wm overscan 0,0,0,0

(Home windows) Use RAB.exe Below Software tab, you possibly can reset your telephone decision. Ensure your telephone is plugged in.

To stop it from taking place once more, all the time use ctrl+c to shut RAB

After coming into python, nothing occurs or it ask me to put in necessities.textual content when all necessities are already put in

Please guarantee that you’ve got put in the required software program. Tesseract and adb must be put in.

In case you are positive you will have put in adb, observe this information so as to add adb to your system path

If all required are set up and you continue to didn’t see something, be sure you have carried out step 9 appropriately.

Extra Steps to if it nonetheless would not assist:

  1. Replace your pip through the use of: python -m pip set up –upgrade pip
  2. Reinstall your necessities, cd c:RealAndroidBot observe by pip set up -r necessities.txt

RAB solely works with 64bit system. You possibly can’t run RAB should you run a 32bit system.

Lastly, for Home windows customers, when all choices failed, simply use the .exe model discovered right here


©2016 Niantic, Inc. ©2016 Pokémon. ©1995–2016 Nintendo / Creatures Inc. / GAME FREAK inc. © 2016 Pokémon/Nintendo Pokémon and Pokémon character names are logos of Nintendo. Different logos are the property of their respective homeowners.
Privateness Coverage

RealAndroidBot is meant for tutorial functions and shouldn’t be used to play the sport PokemonGo as it’s unfair to the group. Use the bot at your individual threat.

Leave a Reply

Your email address will not be published.