Fast Begin for the OPN-2001

Observe the directions under to get began with the OPN-2001 in your platform.


Utilizing the OPN-2001 with a Home windows PC requires you to obtain and set up Opticon’s PC USB Drivers Installer, and an software to retrieve the info just like the PC Companion Software. Each of those are positioned within the Downloads part of this web page.

Preliminary Setup

You’ll solely want to do that half as soon as per laptop.

  1. Obtain the “All-In-One PC Drivers” from the Driver Downloads part of this web page. Run the installer you downloaded by double-clicking on it. Observe the prompts in your display screen till the set up is accomplished.
  2. Obtain the OPN PC Companion Software which can be positioned within the Software program Downloads part of this web page.
  3. Open the compressed file, and run the OPN200X Setup.exe. Observe the directions within the wizard to put in the software program. When it’s completed putting in, the PC Companion Software dialog will seem.
  4. Plug the OPN-2001 into your laptop. Home windows will inform you that it has discovered new {hardware}, and that it’s putting in the drivers for that {hardware}. Then you will notice the standing indicator within the software window flip inexperienced. From the applying window you may obtain barcodes, change settings, or view and set the date and time on the machine.

Scan Barcodes

Amassing knowledge with the OPN-2001 is so simple as pointing and scanning. Scanning barcodes with the large button or “trigger” will retailer barcodes, whereas scanning with the small button or “function” will take away barcodes. Under are some tips on scanning and eradicating barcodes from the machine.

  • When the OPN-2001 has an excellent scan, it’s going to chime, the LED on the machine will flash inexperienced, and the laser will flip off.
  • When the OPN-2001 deletes a barcode, it’s going to give a unique chime than above, and it’ll flash an Orange LED when it has an excellent scan.
  • Deleting the identical barcode once more when there aren’t any extra scans of it current will trigger the OPN-2001 to chime for a couple of second. The LED may also flash purple.

Obtain From the OPN-2001

If you have not accomplished so but, discuss with the Preliminary Setup directions above to get all the right software program put in and prepared. This a part of the information assumes that you’ve got already efficiently setup your laptop to speak with the OPN-2001.

  1. Plug the OPN-2001 into your laptop.
  2. Open the OPN-2001 PC Companion Software by navigating to the Begin Menu shortcut you created through the Preliminary Setup. That is normally in Opticon/OPN200X/OPN200X, and it’ll have an icon that appears like one in all our OPN2001’s.
  3. Double-check that the “Status” mild is inexperienced.
  4. Examine the field subsequent to “Save to file” if you want your barcodes to be saved to your laptop every time you choose “Get Barcodes.” By default, the barcodes will likely be saved within the Paperwork folder in your laptop. To vary this, click on on the ellipsis(…) button and select the place you want to your barcodes saved.
  5. Click on “Get barcodes” to obtain the barcodes that you just simply scanned. Double-check that they bought saved to your file earlier than continuing.
  6. Click on “Delete barcodes” to erase the barcodes saved on the OPN-2001.


So as to arrange the OPN-2001 on the Mac, we might want to set up the Mac Companion Software and configure the OPN-2001 to hook up with the Mac.

  1. To put in the Mac Companion Software, obtain the “OPN-2001 MAC Companion Application” beneath software program downloads. Open the ensuing folder, and run the installer “Opticon OPN Demo Application.pkg.” Observe the prompts till the set up is full.
  2. Plug the OPN-2001 into the Mac. At this level the OPN-2001 needs to be acknowledged as a community interface.
  3. Begin up the OPN-2001 Mac Companion Software utilizing the Finder. It’s going to robotically detect the OPN-2001. The connection could be confirmed by the inexperienced “Connected” textual content within the high proper nook of the applying.

The OPN-2001 and the Mac are actually related and dealing collectively.


There are presently APIs for growing functions to speak with the OPN2001 on/with the next platforms/applied sciences:

  • Home windows XP / Vista / 7 (32 and 64 bit)
  • ActiveX
  • .NET
  • Mac OS X

Setting the time on the OPN2001

To set the time in your OPN2001:

Utilizing the OPN Companion Software

  • With the machine related, select the button for “Set time”.

With out companion app

In case you are utilizing your OPN2001 in every other mode please use Appload.

  • As soon as operating Appload, choose Settings > Port > Opticon Code Reader (1D) (COMX).
  • Then select Utilities > Ship time.

The time in your OPN2001 will likely be set to the time of your laptop.

See also  Safe Porn Sites: 20 Virus-Free and Secure Porn Sites for 2020

Manufacturing unit Reset

To manufacturing facility reset the OPN-2001 please comply with the under directions.

  • Make sure the OPN-2001 has adequate cost (in any case the laser ought to come on with a set off press when the unit is unplugged)
  • Disconnect the OPN-2001 from any USB connections
  • Press and maintain each buttons (scan and clear) for 10 seconds
On the finish of the time you’ll hear a single tone indicating profitable reset. Whereas holding the keys the LED will flash RED (If it flashes every other shade you aren’t holding each buttons firmly sufficient).
Word: It’s potential to disable the manufacturing facility reset possibility of the OPN-2001 with the SDK (and subsequently our Customary PC Demo Software). If that is disabled this characteristic is not going to work till re-enabled.


The primary OS capabilities as a batch mode scanner and requires the usage of the Companion Software. The OS additionally helps the operate of the USB-HID (keyboard) mode.

Putting in USB Drivers and reloading firmware with Appload

Loading Firmware

The Firmware of the OPN-2001 could be upgraded (or reloaded within the case of a corrupt firmware) with the next directions.

  1. Obtain and set up the USB Drivers.
  2. Obtain and set up Appload.
  3. Obtain the firmware for the OPN-2001.
  4. Join the OPN-2001 to the PC
  5. Launch Appload
  6. In Appload choose ‘Settings’ > ‘Port’ > ‘Opticon USB Code Reader(1D) (COMx)
  7. In Appload choose ‘File’ > ‘Obtain‘ and browse to the firmware file (e.g. RBBV0214.hex) and click on ‘open
    The obtain will take roughly 30 seconds at which period you will notice the message ‘Obtain efficiently accomplished’

OPN2001-2003 comparability

OPN2001 Customary Demo firmware
OPN2001 HID firmware
OPN2003 Customary software (OPN2001 emulator)
OPN2003 Batch Demo software

Can the scanned knowledge embrace a prefix and suffix? If sure, can the Prefix and the Suffix be a couple of character (String)?
This isn’t an possibility with the present firmware, nonetheless prefixes or suffixes could possibly be added with customized developed PC aspect software program.
At the moment return or tab are the one obtainable suffixes, nonetheless different prefixes or suffixes could possibly be added with customized developed PC aspect software program.
Sure, and sure as much as 4 direct enter entries. Please discuss with web page U85 of the common menu guide linked under for extra info on prefixes, suffixes preambles, and postambles. http://www.opticonusa.com/pdf/Manuals/Universal_Menu_Book.pdf
This isn’t an possibility with the present firmware, nonetheless prefixes or suffixes could possibly be added with customized developed PC aspect software program.

Does the scanner have an inner serial quantity that may be output as a part of the scanned knowledge?
Sure, though we presently solely have one PC aspect software that may put the serial quantity within the file with the scanned knowledge, the “OPN2001 Data Downloader” software.
See “OPN-2001 Standard Demo firmware”
Sure, it is a configurable possibility. Information is transferred utilizing the NETO32 program or a customized program utilizing the NETO protocol.

Can the scanner be setup to incorporate scanned knowledge time stamp?
Sure, utilizing most of our PC aspect functions together with the “OPN2001 Data Downloader” software.
See “OPN-2001 Standard Demo firmware”
Information saved as Database file (a number of scans of identical barcode will increase amount relatively than including new traces to the file, additionally this implies the time stamp solely exists for the latest scan of the particular barcode)


Configure the OPN2001 in HID Mode

  • Print the web page linked right here and scan the Keyboard Mode barcode.

Change between HID Mode and Traditional Mode

  • Print the web page linked right here.
  • Scan the “Batch Mode” barcode to configure the OPN2001 in Traditional Mode.
  • Scan the “Keyboard Mode” barcode to configure the OPN2001 in HID Mode.

About Keyboard Mode

USB-HID (keyboard) mode permits the scanner to operate as a batch scanner when disconnected from the pc and a real-time scanner when related.

  • Actual Time- To make use of the OPN2001 scanner as an actual time scanner, configure it in HID mode, plug it into the pc and scan barcodes.
  • Batch- When disconnected it’s going to retailer barcodes. You possibly can then convey it again to the PC, and plug it in to retrieve the info. When the set off is pressed the primary time after reconnecting to a PC it’s going to transmit all knowledge off of the unit and onto the PC wherever the cursor occurs to be (Excel, Notepad, and so on).

Different Options

The most recent revision of this firmware added some performance. Customers can now select to transmit time stamps, and barcode IDs (barcode symbology). They will additionally change between a “return” suffix, and a “tab” suffix.

If you need to time stamp your barcode scans, or transmit the Barcode symbology(Code ID), you are able to do this by following the process under
  1. Print the barcode sheet at this hyperlink.
  2. To allow or disable both the time stamp or transmission of the barcode ID, scan the SET barcode, then the Allow or Disable barcode for both possibility, then the END barcode. These choices are disabled by default.
See also  のむらのブログ:石川県河北郡内灘町 オステオパシー医学 のむら接骨院: シブソン筋膜

By default, the OPN-2001 transmits an “Enter” key press after each barcode. To vary this to a tab, or to vary again to return, print this barcode sheet and scan SET, then the “Suffix for All Codes” barcode, adopted by both the “Enter” or the “Tab” barcode, and at last END.


My OPN-2001 has immediately stopped beeping after I scan barcodes. Is it damaged?

It is potential that the beeper has been disabled utilizing the beeper toggle characteristic. The beeper could be disabled or enabled with out utilizing a pc for those who maintain the big key for greater than 10 seconds. To re-enable a disabled beeper, attempt holding this key for about 10 seconds. The OPN will sound a tone when the beeper is re-enabled.

I am attempting to combine the OPN2001 ActiveX management with my Silverlight software, however when I attempt to create the opnCtl object, I get an exception. What is going on on?

The OPN2001 ActiveX management would not expose an Automation API, which is why the exception happens. See the MSDN article about utilizing Automation right here.

How can I talk with the OPN2001 in my Java software?

You may make the most of the native OPN2001 library through JNI, making a JNI wrapper for the uncovered capabilities.

Will functions written for the OPN2001 work with the OPN2002 or OPN2003?

Sure, if the OPN2001 simulation software – a bit of firmware for the OPN2002 and OPN2003 – is put in. The applying simulates the habits and protocol of the OPN2001, making it suitable along with your OPN2001 functions.

Is the serial protocol of the OPN2001 obtainable?

No, we do not launch that info. The really helpful and approved method of speaking with the OPN2001 is through its varied APIs.

Is there a solution to get better the saved knowledge from an OPN2001 after the clear command has been despatched?

Sadly no – the OPN2001 firmware erases the flash sectors the place the info was saved upon executing the clear command. Be sure that the info has really downloaded earlier than you problem the clear command!

Is polling elective or required?

Polling is de facto meant to robotically detect when the OPN2001 has knowledge, after which obtain it through a callback operate. As such, it is not explicitly required.

The OPN-2001 is a small handheld wi-fi barcode reader able to storing as much as 10,000 barcodes at a time.


SDK for OPN200x Host Purposes

There are presently APIs for growing functions to speak with the OPN2001 on/with the next platforms/applied sciences: Home windows XP / Vista / 7 (32 and 64 bit) ActiveX .NET Mac OS X The OPN PC SDK comprises practically the whole lot you would wish to develop your individual host software to interface with the OPN-2001, OPN2003, or OPN2004. Pattern code and documentation are included, nonetheless compilers should not included. Please use a compiler acceptable for the working system you’re growing for: Home windows, or Macintosh OS X.

OS Change Log

  • RBBV0106: First official launch
  • RBBV0107: Repair USB issues : “Set configuration” command with worth 0 not dealt with accurately, generally OPN2001 returns a STALL response when PC tries to ship knowledge.
  • RBBV0108: Repair : after connecting scanner to PC scanner thinks that it acquired a lot knowledge, after sending “EX” command in manufacturing facility mode, scanner doesn’t reset itself. Implement watchdog timer.
  • RBBV0109: Repair : crashes throughout Flash write/erase actions as a consequence of enabled interrupts.
  • RBBV0110: Repair : In manufacturing facility mode scanner can’t exit laser adjustment mode anymore.
  • RBBV0111: Repair : Code 39 CD was not transmitted by default, software program didn’t work on older OPN2001 fashions.
  • RBBV0112: Repair : Scanner reset when transmitting a considerable amount of knowledge (Watchdog)
  • RBBV0113: Scan barcodes, whereas related to the PC.
  • RBBV0114: Clear knowledge with particular barcode
  • RBBV0115: Add help for decoding RSS-14, RSS Restricted, and RSS Expanded bar codes.
  • RBBV0116: Repair telepen numeric bug ’00’ and Code 128 checksum bug ’00’
  • RBBV0117: Repair size choices, set UPC-E1 default to disabled.
  • RBBV0118: Added : choice to reject a bar code which was learn earlier than, allow/disable buzzer possibility, battery low indicator.
  • RBBV0119: Repair : crash when RTC mode is modified
  • RBBV0120: Modified : ship RTS low or RTS excessive command solely in case RTS stage adjustments.
  • RBBV0121: Repair : resend RTS message over USB bus upon command. Up to date : enhance unfavorable label studying.
  • RBBV0122: Repair : Xmit Code-39 CD possibility, scan-direction menu XAP, XAQ. Up to date : take away Codabar/Code-39 FPD, help Code-39 gap-check choices XpercentK,XpercentL,true linker help, Help Code-128 menu labels
  • RBBV0123: Repair : Code39 hole verify (XpercentL) precipitated the OPN to crash. Modified: default for ‘Transmit C39 CD’, ‘Transmit I2of5 CD’, ‘Addon wait time’ is now 2.
  • RBBV0124: Repair : Flash erase/write routine
  • RBBV0125: Repair : RSS bug that precipitated Software Identifier to be eliminated twice. Up to date code 39 decoder. OPN-2001 parameter doc/guide is up to date!
  • RBBV0127: Code-128 not TX CD in entrance of EAN-128
  • RBBV0128: Repair : ‘Convert EAN8 to EAN13 sort’ default needs to be ‘disabled’
  • RBBV0129: Added : Implement request to have the ability to set buzzer quantity even decrease
  • RBBV0131: Added : Aiming mode.
  • RBBV0131a: Added beam restrict mode, parameter for slender beam (0x05), parameter for purpose time (0x13). Examine on PZN (Pharma-Zentral-Nummer) barcodes. Diminished the laser output in aiming mode
  • RBBV0132a: Implement parallel label studying
  • RBBV0133: Added Codablock-F
  • RBBV0135a: Repair Code 128 Examine digit bug.
  • RBBV0140: Fastened a possible crash bug when syncing time with a PC, Added help of ‘Ship Time’ command in Appload (for manufacturing functions)
See also  Capabilities Reference — SmartThings Classic Developer Documentation




Information Sheet
Technical particulars and at-a-glance details about the OPN-2001


Fast Begin Information
A quick and to the purpose set of setup directions for the OPN-2001


Person Guide
A extra detailed utilization guide for the OPN-2001


Settings for HID Firmware (Alternate OS)
A web page of customized settings barcodes unique to the alternate firmware RBB3640x


Specification Guide
A extra detailed guide stuffed with technical specs for the OPN-2001 (really helpful for superior customers and integrators solely)


Common Menu E-book
The Common Menu E-book is a doc containing directions and configuration choices for almost all of Opticon’s merchandise. Help of the instructions on this guide is product particular. A should learn for System Integrators. In impact that is the Person Guide for all of Opticon’s merchandise that would not have a Person Guide of their very own and a complement to all others.
December 2009

Fast Entry Barcode Sheet
This doc comprises the barcodes for change between USB-VCP (Traditional) and HID modes on the OPN2001 Alternate OS.


Software program

Software program

Appload Is Opticon’s multi-purpose firmware replace utility. It’s a Home windows PC software that gives the potential to obtain firmware onto most Opticon merchandise. It additionally comprises a flexible terminal interface that enables serial communication to any serial port related to the PC (be it RS232, USB-VCP or Bluetooth-SPP). Opticon merchandise could be queried and configured on this method.

Firmware: OS
That is the usual firmware shipped with the OPN-2001. This requires the OPN2001 Companion Software to obtain the info file. It additionally will function as a USB-HID (keyboard) batch or real-time scanner. When disconnected it’s going to retailer barcodes (twin tone beep) after which when the unit is plugged into the USB cable & the PC acknowledges it, press the set off as soon as and it’ll merely obtain all knowledge off of the unit and onto the PC wherever the cursor occurs to be (Excel, Notepad, and so on).

OPN PC Companion Software (OPN200x)
The OPN2001 (and any OPN operating its model of the OPN2001 emulator firmware) requires the usage of a PC aspect software to speak and obtain the scanned barcode knowledge. That is Opticon’s free normal software. A free SDK can be obtainable to customise this software.

OPN PC Companion Software Supply Code
The Visible Studio supply information for Opticon’s OPN PC Companion Software

Apple MacOS Model 10.15
Demo Software
That is the newest Mac OS model of the favored OPN 2001 Companion Software.
Obtain this for the latest model.

Apple MacOS Model 10.14
Demo Software
That is the earlier Mac OS model of the favored OPN 2001 Companion Software.
Obtain this model if the most recent model doesn’t run in your Mac OS machine.

This SDK is used to develop Home windows and Mac OS X aspect software program that may talk with an OPN2001 or any OPN operating its OPN2001 emulation firmware. For the SDK essential to develop firmware native to the OPN see the C-Library Equipment.
Model 14 (EGFS003D)



All-In-One PC Drivers
USB-to-serial drivers installer bundle for 32 and 64-bit variations of Home windows XP (32-bit solely), Vista 7, 8, 8.1 and 10. This bundle comprises 4 drivers. The primary and fourth drivers are for the Opticon cradles. The second driver is for the OPN200x scanners together with many different Opticon merchandise. The third driver is an ATEN driver for a well-liked RS232 <-> USB-VCP adapter. You possibly can select any of the drivers to put in on the primary display screen of the installer program. *Word: Opticon USB Drivers could not set up or function accurately if FIPS (Federal Info Processing Requirements) is enabled in your host laptop*

Leave a Reply

Your email address will not be published.