Posted 21 April 2007 – 10:05 AM

http://www.vernalex.com/tools/services/?in…HotKey%20Poller

The ATI HotKey Poller is put in with any present ATI driver set. It’s utilized in intercepting any key combos that you simply outline to carry out particular duties that contain a number of displays. Merely put which means this service listens to your keystrokes and if you press keys that match hotkeys that you simply outline (macros) then it is going to carry out the assigned process to that hotkey. When you disable this service then you’ll not have this performance. I recommend most individuals ought to disable this service except they use a number of displays or odd output gadgets comparable to TVs.

Most present video playing cards assist twin monitor show, and some others assist extra (just like the Matrox Parahelia that helps tri monitor show). This lets you increase your pc’s desktop throughout a number of displays to provide you extra actual property. Those that use their computer systems in additional superior methods, comparable to graphics design or people who simply use plenty of packages directly, discover this means fairly helpful.

The ATI show driver is supplied to assist the performance of multi show. And that is the place the Hotkey Poller is available in. Inside the show property (proper click on desktop, properties) and beneath settings after which beneath the superior button, ten beneath the Shows tab you have got the flexibility to pick which displays or TVs to output your show indicators onto. You may as well configure hotkeys that carry out duties comparable to switching between a number of displays.

When you want to disable this service it is best to set it to disabled and reboot your pc because it won’t allow you to cease the service. When you can’t reboot (or you do not wish to) then you’ll be able to kill the executable ati2evxx.exe. You’ll be able to freely terminate (kill) these via process supervisor as they don’t seem to be protected companies. There’ll almost certainly be two of those processes working beneath the identical title, however they’re each the identical factor. One is almost certainly a driver intercepter and the opposite a frontend shopper of kinds. If there are two then you will want to kill each to correctly shut them.

So whereas I might care much less concerning the hotkey stuff, I do really use multi-display (I simply use my outdated liquid crystal display monitor above my laptop computer once I want a bit of bit extra desktop area). However I am uncertain from what these items is saying as as to whether or not turning off this course of will affect being able to make use of multi-display or simply the flexibility to make use of hotkeys to modify between a number of displays (which I do not do).

See also  Version 6.52

It additionally offers a attainable rationalization of why there are two processes working. (I turned off fast-user switching, and I nonetheless have two processes working. Unsure how you can flip off the one working as USERNAME except I have been to kill it in process supervisor manually each time (which I do not wish to do).

Any ideas?

http://www.tweakguides.com/ATICAT_4.html

ATI Hotkey Poller (ati2evxx.exe) – Additionally referred to as the ATI Exterior Occasion Utility, this service is primarily wanted when you use the ATI Hotkey settings out there within the ATI Catalyst Management Middle. Nevertheless, earlier than disabling this service observe the next: When you use a 3rd social gathering overclocking utility, you need to disable this service in any other case the utility could not work; when you’ve got an XT, X1000 or newer graphics card, disabling this service may also disable the OverDrive part within the Management Middle, and may also stop right clock speeds being utilized in 3D mode; when you run a laptop computer with an ATI graphics card, you might have to preserve this service enabled to permit your LCD display to modify off correctly when the laptop computer is closed; when you use Quick Person Switching then disabling this service may trigger issues with that. If not one of the circumstances above apply to you, I like to recommend that you simply disable this service.

I do not care about any of the 3D stuff as I do not do any pc gaming (and I will flip off fast-user switching), however I’m on a laptop computer, so the bit concerning the display probably not turning off correctly when you disable this service causes some concern. Does this simply imply when you shut your laptop computer lid whereas the pc remains to be on, it might not flip off? Or that if you shutdown, the display could not flip off? (I do not actually ever depart the laptop computer on however shut the display, although I can see doing that if I have been, say, at an airport and I needed to hurry or one thing…) Ideas?

See also  The Crown Prosecution Service

Additionally, if I needed to show it off, would I am going to msconfig, beneath the Providers tab, simply UNCHECK the ATI Hotkey Poller then reboot?

Might I all the time flip it again on, if I needed to simply check to see if it did impact the display turning off when closing the lid, and so on.?

Would I flip it again on the identical approach? That means, would it not nonetheless be listed beneath the Providers tab in msconfig, however simply unchecked, and I might simply test it once more and reboot?

I additionally see that I’ve FIVE svchost.exe issues working! Two for SYSTEM, two for NETWORK SERVICE, and one for LOCAL SERVICE. Why so many?

Let me know what you all suppose… Thanks!

Thanks for the posts! I took a take a look at that after which additionally came upon some extra stuff:So whereas I might care much less concerning the hotkey stuff, I do really use multi-display (I simply use my outdated liquid crystal display monitor above my laptop computer once I want a bit of bit extra desktop area). However I am uncertain from what these items is saying as as to whether or not turning off this course of will affect being able to make use of multi-display or simply the flexibility to make use of hotkeys to modify between a number of displays (which I do not do).It additionally offers a attainable rationalization of why there are two processes working. (I turned off fast-user switching, and I nonetheless have two processes working. Unsure how you can flip off the one working as USERNAME except I have been to kill it in process supervisor manually each time (which I do not wish to do).Any ideas?I do not care about any of the 3D stuff as I do not do any pc gaming (and I will flip off fast-user switching), however I’m on a laptop computer, so the bit concerning the display probably not turning off correctly when you disable this service causes some concern. Does this simply imply when you shut your laptop computer lid whereas the pc remains to be on, it might not flip off? Or that if you shutdown, the display could not flip off? (I do not actually ever depart the laptop computer on however shut the display, although I can see doing that if I have been, say, at an airport and I needed to hurry or one thing…) Ideas?Additionally, if I needed to show it off, would I am going to msconfig, beneath the Providers tab, simply UNCHECK the ATI Hotkey Poller then reboot?Might I all the time flip it again on, if I needed to simply check to see if it did impact the display turning off when closing the lid, and so on.?Would I flip it again on the identical approach? That means, would it not nonetheless be listed beneath the Providers tab in msconfig, however simply unchecked, and I might simply test it once more and reboot?I additionally see that I’ve FIVE svchost.exe issues working! Two for SYSTEM, two for NETWORK SERVICE, and one for LOCAL SERVICE. Why so many?Let me know what you all suppose… Thanks!

See also  Allegorithmic Substance Designer 2017 Free Download

Edited by bloomcounty, 21 April 2007 – 10:23 AM.

Leave a Reply

Your email address will not be published.