Solidworks and Home windows 7

Solidworks and Home windows 7

PaperClipFixesAll

(Mechanical)

(OP)

30 Dec 09 01:12

I lately was made conscious that many purposes (at the least so far as XP is worried) do not at all times totally make the most of multiple-core processors in addition to RAM over a certain quantity.  Due to this fact, my boss is contemplating upgrading to Home windows 7 because it appears it extra totally makes use of top-of-the-line workstation elements.  Is that this true? Can anybody vouch that there’s a substantial efficiency enhance with Home windows 7 on computer systems with multi-core processors and 4 or extra GB of RAM?

Additionally, can anybody level me to a pc that may be a good match for Solidworks, no matter worth?

RE: Solidworks and Home windows 7

SBaugh

(Mechanical)

30 Dec 09 08:14

As for computer systems I’ll solely use a Dell Precision Workstation for SW (T7500). The bottom mannequin Dell provides will not be going to be sufficient. I’d soup it up with some excessive finish elements, if cash is not any object. You will get twin video card playing cards now every with 1.5GB of reminiscence (that ought to assist ). With 64-bit you’ll be able to’t exceed 128GB of RAM, nonetheless Motherboards do not help that a lot but anyway. I’d get 8-12 in all probability will not use that a lot for the subsequent few years at the least, however its there should you want it. Defeintly go together with the i7 chips. They appear to be a lot sooner at this time.

After all this all is determined by what you do with SW (besides the i7 chip) and the way large your assemblies are. A few of hte stuff above is overkill, various on what you do. We construct right here Massive MachineTooling Tools. A few of our assemblies have made it as much as 2000+ assemblies and opening them can take a while. Nevertheless working over a community like we do… it doesn’t matter how briskly our computer systems are, as a result of we’re restricted to our community and server velocity. Solely factor our pc helps is with stability, but nonetheless the server may cause stability points with the information open on our machine.

Hope that helps some.
Regards,

From what I’ve been studying since your publish is that Home windows 7 is laggy when downloading information or when multi-tasking. To me that doesn’t inform me its the most effective OS, nonetheless in case you are wanting longevity in a pc its the way in which to go. Plus it can in all probability get higher since its nonetheless a younger OS. I’ve used WIndows 7 and like Vista over 7. I do know Vista bought a nasty rap when it first got here out, however after some twaeking of the OS it was not that dangerous. Nonetheless desire XP’s look although.As for computer systems I’ll solely use a Dell Precision Workstation for SW (T7500). The bottom mannequin Dell provides will not be going to be sufficient. I’d soup it up with some excessive finish elements, if cash is not any object. You will get twin video card playing cards now every with 1.5GB of reminiscence (that ought to assist). With 64-bit you’ll be able to’t exceed 128GB of RAM, nonetheless Motherboards do not help that a lot but anyway. I’d get 8-12 in all probability will not use that a lot for the subsequent few years at the least, however its there should you want it. Defeintly go together with the i7 chips. They appear to be a lot sooner at this time.After all this all is determined by what you do with SW (besides the i7 chip) and the way large your assemblies are. A few of hte stuff above is overkill, various on what you do. We construct right here Massive MachineTooling Tools. A few of our assemblies have made it as much as 2000+ assemblies and opening them can take a while. Nevertheless working over a community like we do… it doesn’t matter how briskly our computer systems are, as a result of we’re restricted to our community and server velocity. Solely factor our pc helps is with stability, but nonetheless the server may cause stability points with the information open on our machine.Hope that helps some.Regards,

Scott Baugh, CSWP pc2
www.scottjbaugh.com

Quote:

“If it’s not broke, Don’t fix it!”

FAQ731-376: Eng-Ideas.com Discussion board Insurance policies

RE: Solidworks and Home windows 7

MadMango

(Mechanical)

30 Dec 09 08:51

Rising your efficiency will not be so reduce and dry, because of the varied varieties of fashions and workflow you might have.  Take a look on the varied benchmarks that Anna has on her web site, choose one that’s nearer to the kind of work you’re doing at this time.
http://spreadsheets.google.com/pub?key=pz7wTpIkC7LA28ybEyxyTPw
http://spreadsheets.google.com/pub?key=pz7wTpIkC7LAuGJ0evMeWQw
http://spreadsheets.google.com/pub?key=pz7wTpIkC7LBfngm8bDDjTA
http://spreadsheets.google.com/pub?key=pz7wTpIkC7LAIi-HmWLSlPw

When you get an opportunity to digest all the knowledge on the benchmark spreadsheets, you may be in a greater place to spec out a pc that you just offers you essentially the most bang on your buck, with out losing these engineering funds on pc overhead that won’t be utilized.

Having stated all that, on the subject of fast responding SolidWorks, you’ll be able to’t go mistaken with a more moderen 64-bit OS, a number of processors, a

licensed graphics card and drivers

, and essentially the most reminiscence your motherboard can deal with.

So far as 32 or 64-bit methods and present purposes/packages, some older apps had been solely written for 32-bit methods and won’t make the most of the opposite 32-bits or a number of processors. Vista and Win7 each are available in 32-bit and 64-bit flavors, so you need to decide what you actually need. Since you’re posting within the SolidWorks thread I will assume that you’re in search of elevated efficiency associated to CAD.Rising your efficiency will not be so reduce and dry, because of the varied varieties of fashions and workflow you might have. Take a look on the varied benchmarks that Anna has on her web site, choose one that’s nearer to the kind of work you’re doing at this time.When you get an opportunity to digest all the knowledge on the benchmark spreadsheets, you may be in a greater place to spec out a pc that you just offers you essentially the most bang on your buck, with out losing these engineering funds on pc overhead that won’t be utilized.Having stated all that, on the subject of fast responding SolidWorks, you’ll be able to’t go mistaken with a more moderen 64-bit OS, a number of processors, a, and essentially the most reminiscence your motherboard can deal with.

See also  Ball Python Morphs: The 50 MOST Popular (Pictures & Prices)

Have you ever learn FAQ731-376: Eng-Ideas.com Discussion board Insurance policies to make the most effective use of those Boards?

RE: Solidworks and Home windows 7

Updraft

(Mechanical)

30 Dec 09 10:29

The benefit of the 64-bit Vista and Win-7 is that they mechanically acknowledge and use all of the RAM you’ll be able to stuff in them.  The 32-bit methods require some information to be modified to allow the OS to make the most of greater than about 2.5G of RAM.

With regard to multi-core processors, there are a number of issues that should ALL be in place to get full benefit:
1. The OS should have the ability to use multi-cores.  I do know that Vista and Win-7 do and I feel that XP additionally does.
2. The applying have to be to take advnatage of the multi-cores.  Neither SolidWorks nor some other stable modeling system (that I’m conscious of at the least) is written to reap the benefits of multi-cores straight.  The software program by its nature requires sequential computations.

That doesn’t imply that you’ll not see a good thing about multi-cores, however extra will not be essentially higher.  Once I purchased my system about two years in the past the homework I did indicated that I’d get extra bang for the buck with a twin-core processor relatively than a quad-core.  The dual-core ran at a sooner clock velocity and was decrease price.  The decrease price I’d see for the time being of buy, however the sooner clock velocity determination would profit me for the lifetime of the machine.

There are some apps that do straight profit from extra cores, similar to photograph rendering.  FEA may also.  If you’re working SWX, Phrase, Excel, Outlook, and net browsers concurrently then a twin-core processor can do all of it.  I have not priced the chips so Twin vs. quad vs. n-cores could be virtually the identical worth.

I’d search for velocity associated objects within the system (chip Hz, cache, and so forth.), good video, and all of the RAM you’ll be able to stuff into the field.

– – -Updraft

RE: Solidworks and Home windows 7

Standing

(Mechanical)

30 Dec 09 11:04

Try the article “Installing SolidWorks 2009 SP5″ on a Home windows 7 Laptop” on

PaperClipFixesAll,Check out the article “Putting in SolidWorks 2009 SP5″ on a Windows 7 Computer” on http://www.solidmuse.com/

Standing
SolidWorks Professional 2009 x64, SP3.0, PDMWorks Workgroup, SolidWorks BOM,
HP xw8600, 64-bit Home windows Vista Enterprise, Service Pack 1
Intel Xeon CPU, 3.00 GHz, 16 GB RAM, Digital reminiscence 166682 MB, nVidia Quadro FX 4600

RE: Solidworks and Home windows 7

beachcomber

(Mechanical)

30 Dec 09 11:22

Not essentially true.
I feel Unigraphics is, however extra relevant to SolidWorks is the truth that Parasolid is multicore enabled and this may help in some areas.
As a SolidEdge person engaged on some massive assemblies previously (30K elements) I’ve commonly seen 4 cores working at 100% when creating drawing views of those fashions. This might not be the case with SolidWorks as a result of view creation is dealt with otherwise.
I am positive it can assist with evaluation and rendering.

If price of a system will not be actually an element I imagine you need to go to a specialist CAD system builder and talk about your necessities.
If you’re engaged on large assemblies then you’ll in all probability require extra that 4GB of ram so you’ll subsequently have to go to a 64-bit OS, whether or not that is XP, Vista or W7.
One different factor to recollect is that not all purposes are supported by W7. Some would require XP compatibility mode which is simply out there in sure variations of W7.
I do know somebody who lately upgraded his new Dell laptop computer to W7 through the free improve supply, solely to search out his outdated AutoCad and a few evaluation software program would not run.

 

Quote -“Neither SolidWorks nor any other solid modeling system (that I am aware of at least) is written to take advantage of multi-cores directly”Not essentially true.I feel Unigraphics is, however extra relevant to SolidWorks is the truth that Parasolid is multicore enabled and this may help in some areas.As a SolidEdge person engaged on some massive assemblies previously (30K elements) I’ve commonly seen 4 cores working at 100% when creating drawing views of those fashions. This might not be the case with SolidWorks as a result of view creation is dealt with otherwise.I am positive it can assist with evaluation and rendering.If price of a system will not be actually an element I imagine you need to go to a specialist CAD system builder and talk about your necessities.If you’re engaged on large assemblies then you’ll in all probability require extra that 4GB of ram so you’ll subsequently have to go to a 64-bit OS, whether or not that is XP, Vista or W7.One different factor to recollect is that not all purposes are supported by W7. Some would require XP compatibility mode which is simply out there in sure variations of W7.I do know somebody who lately upgraded his new Dell laptop computer to W7 through the free improve supply, solely to search out his outdated AutoCad and a few evaluation software program would not run.

bc.
2.4GHz Core2 Quad, 4GB RAM,
Quadro FX4600.

The place would we be with out sat-nav?

RE: Solidworks and Home windows 7

PaperClipFixesAll

(Mechanical)

(OP)

30 Dec 09 11:37

hmmmm…

So, if I am understanding appropriately, our present 2.XX Ghz Twin Core processors with 4GB of RAM is greater than Solidworks can actually reap the benefits of for the time being?  We do deal with FEA initiatives now and again, however at the least 90% of our work is commonplace drafting/modeling and figuring out the geometry of an meeting.  Our largest challenge for the time being is a form of jack-of-all-trades oil rig that is imagined to deal with a drilling operation from begin to end (together with properly abandonment), so I am positive you’ll be able to think about it has fairly a couple of items.  Nevertheless, as one particular person talked about, the community might be the bottleneck in our case anyway and I do not assume there’s any sooner networking technique than ethernet for the time being.  At this level, I am pondering we must always maintain off a couple of 12 months till Home windows 7 will get some bug fixes and software program updates and Solidworks begins making the most of extra highly effective {hardware}.  Anybody agree?

 

RE: Solidworks and Home windows 7

MadMango

See also  7 Best HTML Editors Out There (& Why Free Options Work Just Fine)

(Mechanical)

30 Dec 09 11:48

2. You do not point out what kind of graphics card you’re utilizing.

These could make an enormous distinction in how properly SW handles your modeling wants.  If you’re on a 32-bit OS, is your 3gb Swap enabled?

If you’re going to be engaged on assemblies which have numerous elements (over 5k), then I feel you’ll profit from a 64-bit OS because of the extra reminiscence that will likely be out there to you.  Reminiscence alone won’t prevent, you want an actual graphics card for CAD.

1. You do not point out in case you are working a 32 or 64-bit working system.2. You do not point out what kind of graphics card you’re utilizing.These could make an enormous distinction in how properly SW handles your modeling wants. If you’re on a 32-bit OS, is your 3gb Swap enabled?If you’re going to be engaged on assemblies which have numerous elements (over 5k), then I feel you’ll profit from a 64-bit OS because of the extra reminiscence that will likely be out there to you. Reminiscence alone won’t prevent, you want an actual graphics card for CAD.

Have you ever learn FAQ731-376: Eng-Ideas.com Discussion board Insurance policies to make the most effective use of those Boards?

RE: Solidworks and Home windows 7

PaperClipFixesAll

(Mechanical)

(OP)

30 Dec 09 12:22

we’re on 32-bit XP
My graphics card is a NVIDIA Quadro FX 3450/4000 SDI, however I’ve an older pc, my boss and the draftsman have barely newer and I am positive greater spec’d graphics playing cards and I do know for a truth they’ve Xeon processors.

How do I allow the 3GB change? is it a {hardware} or software program factor?  IIRC, the computer systems had been purchased this manner (4GB of RAM with 32-bit XP) so I’d assume the change can be enabled (it says I’ve 3.25 GB of RAM in my system information).

RE: Solidworks and Home windows 7

Standing

(Mechanical)

30 Dec 09 12:26

Quote:

At this level, I am pondering we must always maintain off a couple of 12 months till Home windows 7 will get some bug fixes and software program updates and Solidworks begins making the most of extra highly effective {hardware}.  Anybody agree?

I don’t agree. At $50 to $100 per hour per worker (firm price of worker) with simply 10% loss in velocity would price lots over the 12 months. Your PC’s sound sufficiently old to interchange. Get a devoted Engineering server, use PDM of some kind, work off your native drive and and so forth.
 

PaperClipFixesAll,I don’t agree. At $50 to $100 per hour per worker (firm price of worker) with simply 10% loss in velocity would price lots over the 12 months. Your PC’s sound sufficiently old to interchange. Get a devoted Engineering server, use PDM of some kind, work off your native drive and and so forth.

Standing
SolidWorks Professional 2009 x64, SP3.0, PDMWorks Workgroup, SolidWorks BOM,
HP xw8600, 64-bit Home windows Vista Enterprise, Service Pack 1
Intel Xeon CPU, 3.00 GHz, 16 GB RAM, Digital reminiscence 166682 MB, nVidia Quadro FX 4600

RE: Solidworks and Home windows 7

Updraft

(Mechanical)

30 Dec 09 12:29

In case your community is a contributor to hurry issues you’ll be able to profit that by utilizing PDM.  (It’s best to in all probability be utilizing it anyway.)  PDM copies the information to an area vault in your laborious drive.  The one important community site visitors is while you open and shut your classes.  Throughout your work SWX is utilizing the information in your laborious drive and never the community, dramatically enhancing velocity and different glitches.

– – -Updraft

RE: Solidworks and Home windows 7

SBaugh

(Mechanical)

30 Dec 09 12:41

To repair the community subject you have to to go to a PDM system like PDMWorks. We’ve got PDM right here, however haven’t but discovered a approach to put it to use to our wants… that’s one motive I used to be employed right here to assist with implantation.

Regards,

MadMango is appropriate, please checklist your specs.To repair the community subject you have to to go to a PDM system like PDMWorks. We’ve got PDM right here, however haven’t but discovered a approach to put it to use to our wants… that’s one motive I used to be employed right here to assist with implantation.Regards,

Scott Baugh, CSWP pc2
www.scottjbaugh.com

Quote:

“If it’s not broke, Don’t fix it!”

FAQ731-376: Eng-Ideas.com Discussion board Insurance policies

RE: Solidworks and Home windows 7

PaperClipFixesAll

(Mechanical)

(OP)

30 Dec 09 14:09

Effectively, I feel I ought to make it clear that I work for a small firm of 9 individuals: 4 engineers/draftsmen and 4 store staff (last meeting and a few welding is dealt with on web site)and the proprietor’s spouse dealing with funds.  The one server may as properly be referred to as the engineering server as his spouse solely makes use of it to a minimal extent.

I imply, ideally, sure, a 64-bit OS would enhance velocity, which might assist throughout, but when any conflicts or errors happen, it will likely be a lot worse than a bit of lag when loading information (which, to be sincere, is fairly minimal for many assemblies) and a drop in FPS when coping with large assemblies.  Additionally, the draftsman may be very adamant about AutoCAD compatibility and somebody on this thread reported that it will not work in 7, which is unacceptable.

Nonetheless, we’re planning on shopping for a brand new pc for the store supervisor since we needed to take his workstation for the brand new draftsman beginning on Monday and we plan to get one thing with Home windows 7 to provide it a strive.

 

RE: Solidworks and Home windows 7

SBaugh

(Mechanical)

30 Dec 09 15:15

With such a small firm I’d hope that there could possibly be some approach to work out a greater course of. Hopefully your boss sees that having a extra fluid setting wouldn’t solely profit you as a employee, however as a enterprise.

Possibly I simply see the method totally different than most individuals, however the margin for error when utilizing greater than 1 CAD system inside the identical facility is harmful.

Regards,

You need to have a look at longevity. Half of our firm remains to be utilizing AutoCAD, however right here in Mechanical Engineering we use Solidworks. We’ve got to do alot of conversations and such which I feel is silly. IMO I feel if Engineering switches to Solidworks the remaining ought to comply with. Redrawing or utilizing 2D together can result in futher errors within the course of. Nevertheless I’m not a CEO or president of an organization.With such a small firm I’d hope that there could possibly be some approach to work out a greater course of. Hopefully your boss sees that having a extra fluid setting wouldn’t solely profit you as a employee, however as a enterprise.Possibly I simply see the method totally different than most individuals, however the margin for error when utilizing greater than 1 CAD system inside the identical facility is harmful.Regards,

See also  Dettlaff van der Eretein

Scott Baugh, CSWP pc2
www.scottjbaugh.com

Quote:

“If it’s not broke, Don’t fix it!”

FAQ731-376: Eng-Ideas.com Discussion board Insurance policies

RE: Solidworks and Home windows 7

PaperClipFixesAll

(Mechanical)

(OP)

30 Dec 09 15:22

oh, properly he primarily makes use of Solidworks, he simply makes use of AutoCAD when he must redraw prints or one thing actual fast for no matter motive as a result of he is sooner with AutoCAD.  95% of his work (or extra) is Solidworks.

RE: Solidworks and Home windows 7

MadMango

(Mechanical)

30 Dec 09 15:35

I feel given your work setting, I’d push for the brand new Win7 workstation to go to your finest engineer/designer, and bump his machine right down to the Store Supervisor.  In spite of everything, you need to check a system within the circumstances it will likely be used.  I can not think about the Store Supervisor placing he pc by way of all it paces like somebody in Engineering.

That is a nasty behavior to encourage. What occurs when the day comes when that “quick drawing” must be included right into a stable mannequin? Somebody goes to must reverse engineer that 2D ACAD drawing, which quantities to double the trouble.I feel given your work setting, I’d push for the brand new Win7 workstation to go to your finest engineer/designer, and bump his machine right down to the Store Supervisor. In spite of everything, you need to check a system within the circumstances it will likely be used. I can not think about the Store Supervisor placing he pc by way of all it paces like somebody in Engineering.

Have you ever learn FAQ731-376: Eng-Ideas.com Discussion board Insurance policies to make the most effective use of those Boards?

RE: Solidworks and Home windows 7

AnnaWood

(Mechanical)

30 Dec 09 21:15

SolidWorks is cpu certain.

CPU for velocity, x64 bit OS for reminiscence allocation.

You’ll profit from getting a brand new pc with an updated cpu with x64 bit Home windows 7 and at the least 6 gigs of reminiscence.

A better finish video card is required in case you have large assemblies or elements with a variety of aspects that you’re rolling round on display.  The video card will enhance efficiency of the display regens within the person interface.  It won’t significantly velocity up mannequin rebuilds, the cpu is king there.

The query to go together with a twin core or quad core is now not legitimate.  Up to now the Core 2 Duo’s had been sooner then their Core 2 Quad cousins.  That’s now not true as you may get Core i7/Xeon 3500 or 5500 quads at a excessive clock velocity and they are going to be a lot sooner then the Core 2 Duos and Quads they changed.

Run the benchmarks on my web site and it’ll present you the place your present {hardware} stands.  The brand new Intel cpu’s will in all probability supply a substantial velocity increase.

Cheers,
 

For SolidWorks velocity you need the quickest most trendy cpu structure you should buy. Right now that may be a excessive clock velocity Core i7 or the Xeon 3500 or 5500 collection cpu.SolidWorks is cpu certain.CPU for velocity, x64 bit OS for reminiscence allocation.You’ll profit from getting a brand new pc with an updated cpu with x64 bit Home windows 7 and at the least 6 gigs of reminiscence.A better finish video card is required in case you have large assemblies or elements with a variety of aspects that you’re rolling round on display. The video card will enhance efficiency of the display regens within the person interface. It won’t significantly velocity up mannequin rebuilds, the cpu is king there.The query to go together with a twin core or quad core is now not legitimate. Up to now the Core 2 Duo’s had been sooner then their Core 2 Quad cousins. That’s now not true as you may get Core i7/Xeon 3500 or 5500 quads at a excessive clock velocity and they are going to be a lot sooner then the Core 2 Duos and Quads they changed.Run the benchmarks on my web site and it’ll present you the place your present {hardware} stands. The brand new Intel cpu’s will in all probability supply a substantial velocity increase.Cheers,

Anna Wooden
Anna Constructed Workstation, Core i7 EE965, FirePro V8700, 12 gigs of RAM, OCZ Vertex 120 Gig SSD
SW2010 SP0, Home windows 7
http://www.solidmuse.com
http://www.phxswug.com

RE: Solidworks and Home windows 7

ChrisDuncan

(Mechanical)

31 Dec 09 04:22

NOTICE

Not too long ago speaking to my SW VAR, she stated SW ’10 has some points with Home windows 7, only a heads up, have not skilled this personally. You’d absolutely count on potential issues with ’08 and ’09.

RE: Solidworks and Home windows 7

beachcomber

(Mechanical)

31 Dec 09 08:17

If somebody does and ACad drawings after which it will get solid-modelled, which one is the grasp?
If its a easy componenet you may as properly mannequin it becauae its not going to take lengthy to do it.
If its extra complicated then you need to mannequin it even when it takes a bit longer as a result of you’ll scale back your drawing errors.

I’ve to agree with Scott – utilizing totally different CAD methods is asking for bother.If somebody does and ACad drawings after which it will get solid-modelled, which one is the grasp?If its a easy componenet you may as properly mannequin it becauae its not going to take lengthy to do it.If its extra complicated then you need to mannequin it even when it takes a bit longer as a result of you’ll scale back your drawing errors.

bc.
2.4GHz Core2 Quad, 4GB RAM,
Quadro FX4600.

The place would we be with out sat-nav?

Purple Flag This Submit

Please tell us right here why this publish is inappropriate. Causes similar to off-topic, duplicates, flames, unlawful, vulgar, or college students posting their homework.

Purple Flag Submitted

Thanks for serving to maintain Eng-Ideas Boards free from inappropriate posts.
The Eng-Ideas employees will verify this out and take acceptable motion.

Reply To This Thread

Posting within the Eng-Ideas boards is a member-only function.

Click on Right here to hitch Eng-Ideas and speak with different members! Already a Member? Login

Leave a Reply

Your email address will not be published.